Vertical Shuttle Table Injection Molding Machine

Features
  • Vertical direct hydraulic clamping system is designed for accurate, safe operation, especially suitable for insert molding.
  • With double slide table or rotary design, put in, takeout products and molding finish at the same time, which is more safe and efficient for production , then reduce the cost of production.
  • High precision mold platen ( Parallelism / flatness : 0.02/100 mm), heavy duty tie-bars, and low pressure mold clamping work together to greatly extend machine & mold life.
  • Nitride and NIP/ Nitroflon coated screws and barrels are long-lasting, robust and provide superior acid/alkaline resistance.
  • Heavy-duty double cylinder injection unit is maintenance friendly and free of oil leaks.
  • All series adapted Variable pump +PQ valves enable energy savings of 30~50%.
  • Proportional hydraulic control system provides low noise, low energy consumption, and smooth machine movements with durable life.
  • Low oil temperature, durable parts, high speed injection, and quiet operation.
  • Controller can record the production conditions such as temperature, pressure, flow, position available on the panel, reducing adjust of machine.
  • All machine with compact , space-saving design, reduce the heavy burden of the floor of factory.

Energy Saving

Energy Saving

Output Promotion

Output Promotion

Safety Design For Operator

Safety Design For Operator

Vertical Hydraulic Clamping System

Vertical Hydraulic Clamping System

Pick and Place While Molding

Pick and Place While Molding

Main specifications
MODEL K360-110-25DV-1 K410-180-40DV-1 K460-250-55DV-1 K520-360-80DV-1 K560-460-120DV-1 K660-760-160DV-1
Injection Unit
Screw Diameter mm 22 28 34 26 32 40 31 38 44 35 40 45 40 45 50 45 50 55
Injection Pressure kgf/cm² 2329 1438 975 2330 1538 984 2447 1629 1215 2286 1750 1383 2226 1759 1425 2191 1775 1467
Injection Capacity cm³ 46 74 109 74 113 176 106 159 213 173 226 286 226 286 353 350 432 522
Injection Weight (PS) oz 1.5 2.5 3.6 2.5 3.8 5.9 3.5 5.3 7.1 5.8 7.5 9.5 7.5 9.5 11.8 11.7 14.4 17.4
gram 43 70 103 70 106 166 100 150 201 164 214 270 214 270 334 330 408 494
Injection Rate cc/s 37 60 89 61 92 144 74 111 149 99 130 164 154 195 241 158 195 236
Screw Stroke mm 120 140 140 150 160 200
Nozzle Stroke mm 180 180 180 180 180 180
Nozzle Contact Force tf 3.8 3.8 3.8 3.8 3.8 3.8
Injection Speed mm/sec 98 115 98 103 123 99
Screw Rotation Speed rpm 0 ~ 180 0 ~ 180 0 ~ 180 0 ~ 180 0 ~ 150 0 ~ 150
Clamping Unit
Clamping Force tf 25 40 55 80 120 160
Clamping Stroke mm 200 200 200 200 250 250
Max. Mould Space mm 400 400 400 400 500 500
Min. Mold Height mm 200 200 200 200 250 250
Overall Size of Platens (H*V) mm 500*290 560*300 620*400 700*570 790*590 920*720
Space Between Columns (H*V) mm 360*150 410*150 460*240 520*385 560*360 660*460
Ejector Force tf 0.7(2.7) 0.9(2.7) 1.7(2.7) 1.7(2.7) 2.7(2.7) 2.7(2.7)
Ejector Stroke mm 25(60) 35(60) 40(100) 50(100) 60(100) 60(100)
Mold Transfer Unit
Type* 2S 2S 2S 2S 2S 2S
Moving Plate Stroke mm 310 320 410 550 580 730
Size of Moving Plate (H*V / DIA) mm 350*600 400*620 450*810 510*1100 550*1150 650*1450
Others
Drive Motor (with Variable pump) kw(HP) 3.7(5HP) 5.5(7.5HP) 7.5(10HP) 7.5(10HP) 11.25(15HP) 11.25KW(15HP)
Heater kw 3.4 5.6 6 7.5 9 11
System Pressure kgf/cm² 140 140 140 140 140 140
Oil Tank Capacity L 140 160 200 200 300 300
Dimension of Machine﹝L*W*H﹞ m 1.7*1.0*2.7 1.8*1.1*2.9 1.9*1.2*3.1 2.5*1.4*3.8 2.9*1.6*4.2 3.2*1.8*4.6
Weight of Machine ton 1.2 1.7 2.3 4.2 5.5 7

Type*: 1S=Single Slide Table; 2S=Shuttle Table; R = Rotary Table; V=Fixed Planten

Back to List
If you have any needs, or are interested in our products, welcome to contact us