Smart Low-Pressure Molding Starts with R&D and Mold Trials
Smart Low-Pressure Molding for Faster Product Development
To meet the demands of rapid electronics development, high-mix low-volume production, and low-carbon manufacturing, SmartEdge integrates low-pressure molding, smart data, and modular design to create a new generation of LPM solutions optimized for R&D and mold trials.
Making material testing, process validation, and low-volume pilot production faster, simpler, and more data-driven.
What Is Low Pressure Molding (LPM)?
A Faster, Lighter Encapsulation Process Designed for Sensitive Electronic Components
Low Pressure Molding (LPM) is an electronic encapsulation technology positioned between conventional potting and high-pressure injection molding.
LPM uses low-pressure molding materials such as Polyamide Hot Melt to directly encapsulate electronic components at relatively low injection pressures. It can be applied to PCBs, cables, connectors, sensors, and other electronic components to provide protection against water, dust, vibration, and electrical insulation.
Compared with conventional Epoxy / PU potting, which requires a relatively long curing time, LPM uses a mold to form the encapsulation directly and can complete the process in as little as tens of seconds, improving product appearance, process efficiency, and material utilization.
Five Key Process Advantages of LPM
- Low-Pressure Encapsulation: With molding pressures of approximately 20–500 psi, LPM is more suitable for encapsulating sensitive electronic components than conventional high-pressure plastic injection molding.
- Fast Molding: Typical molding cycles are approximately 15–60 seconds, significantly reducing the curing time required by conventional potting processes.
- Precise Forming: Direct molding enables precise control of encapsulation shape and thickness, overcoming the limitations of conventional potting in controlling finished appearance.
- Reliable Protection: Suitable for waterproof, dustproof, vibration-resistant, and electrically insulating encapsulation. Depending on product and mold design, IP67 protection requirements can be achieved.
- Low-Carbon Material Applications: Certain Polyamide Hot Melt materials can be made with bio-based feedstocks. Combined with rapid molding and precise material usage, LPM provides the electronics industry with an alternative low-carbon encapsulation process.
From hours of potting and curing to low-pressure molding in just tens of seconds.
LPM does more than change the encapsulation process—it provides a faster and more precise approach to electronic product development and manufacturing.
Does Your R&D Team Face These Challenges?
Product Development Shouldn't Waste Time on Repeated Trial and Error
LPM addresses many of the process limitations of conventional potting. However, in R&D, prototyping, and high-mix low-volume applications, new challenges still remain.
SmartEdge was developed based on real-world LPM applications. Through customer interviews and user research, we found that the biggest barriers to R&D efficiency are often not whether a part can be molded, but the time spent on material changeovers, mold trials, parameter adjustment, and knowledge transfer.
① Time-Consuming Material Changeovers and Cleaning
High-mix R&D environments require frequent material changes. Conventional material changeover and cleaning procedures are time-consuming and can slow down product development.
② Mold Trials Rely Heavily on Experience
Process parameters such as temperature, pressure, speed, and time require repeated adjustment, making it difficult for less-experienced operators to quickly establish optimal settings.
③ Mold Trial Parameters Are Not Effectively Retained
Mold trial records are often scattered across paper documents, Excel files, or individual engineers' experience. When similar products are developed again, the trial-and-error process often starts over.
④ Machine Data Remains Isolated
Process parameters, mold trial results, and energy data are often disconnected, making further analysis and smart manufacturing applications difficult.
So, We Rethought LPM
What If a Low-Pressure Molding Machine Were Designed Specifically for R&D?
Conventional injection molding machines are primarily designed for stable mass production. R&D engineers, however, work in a very different environment:
Rapid Prototyping → Change Materials → Change Molds → Adjust Parameters → Validate → Record → Test Again
SmartEdge rethinks low-pressure molding around this R&D workflow.
We didn't simply make an LPM machine smaller. We redesigned the relationship between machine, operation, data, and people, making low-pressure molding better suited for R&D validation, high-mix low-volume production, and rapid product development.
What Is SmartEdge?
A Smart LPM Platform Built for R&D and Process Validation
SmartEdge is KING'S Solution's next-generation smart low-pressure molding platform. Built around a benchtop LPM machine, it integrates modular equipment, smart mold trials, process data, and low-carbon management capabilities.
Starting from the very first mold trial, users can progressively build their own material and process knowledge base.
Who Is SmartEdge For?
Designed for R&D and Manufacturing Teams That Need Faster Validation
R&D Engineers
For rapid validation of new products, materials, and encapsulation processes.
Material Development Teams
For molding tests using small quantities of material, helping reduce material testing costs.
Electronics and Cable Manufacturers
For high-mix low-volume production, high-end cable applications, and electronic component encapsulation where shorter mold trial and product development cycles are required.
Corporate R&D Centers and Laboratories
For teams that need an LPM platform capable of recording process data, comparing results, and supporting continuous research.
Low-Carbon Product Development Teams
For evaluating bio-based and low-carbon materials, as well as the feasibility of replacing conventional potting processes with LPM.
Start with One Machine. Expand Your SmartEdge.
Start Small. Expand Smart.
Every R&D environment is different, and so is the SmartEdge configuration it needs.
Start with the core low-pressure molding machine, then expand according to your material testing, smart mold trial, data management, or automation requirements to build the SmartEdge R&D environment that fits your needs.
SmartEdge
Benchtop Low-Pressure Molding Machine
Designed for R&D mold trials, rapid prototyping, and low-volume production.
Explore the SmartEdge Machine ↓