Finished Products
Applications
Features
- Precision Vertical mold clamping system (Parallelism/ flatness: 0.02/100 mm) with heavy-duty tie-bars works greatly to extend machine & mold life and reduce flash of product.
- With double slide、rotary table design, pick and place products while molding finish, make production safe and efficient, increase production up to 50%.
- The static mixer with Larger L/D can well mix A/B components.
- Quick- Change Pallet System is operator- friendly change of material
- Comparing to the screw charging system to save change-time and material up to 2 times.
- With servo pump power system saving energy 50~70%.
- Quick Color Change System for LSR injection molding , a color (material) change may required only 10 minutes
- Exhangable full sets of static mixer cylinder and metering tube totally avoid material residue problem
- Saving of material increase to a surprised scale of more than 80%
Vertical Hydraulic Clamping System
Safety Design for Operator
Energy Saving
Operator-friendly
Main specifications
| Model |
KL460-400-75DVS-1-S68 Single Slide |
|||
|---|---|---|---|---|
| INJECTION UNIT | ||||
| Plunger Diameter | mm | 36 | ||
| Injection Capacity | cm³ | 407 | ||
| Injection Pressure | kgf/cm² | 437 | ||
| Injection Weight | oz | 15.5 | ||
| gram | 439 | |||
| Injection Rate | cc/s. | 100 | ||
| Injection Speed | mm/s | 99 | ||
| Plunger Stroke | mm | 200 | ||
| Nozzle Stroke | mm | 300 | ||
| Nozzle Contact Force | ton | 3.2 | ||
| CLAMPING UNIT | ||||
| Clamping Force | ton | 75 | ||
| Minimum Mold Height | mm | 200 | without Heating Platen | |
| Opening Stroke | mm | 250 | ||
| Maximum Daylight | mm | 450 | ||
| Overall Size Of Platens | mm | 620*460 | ||
| Space Between Columns | mm | 460*300 | ||
| Size Of Shuttle Table | mm | 450*460 | ||
| Shuttle Table Stroke | mm | 500 | ||
| Ejector Force | ton | 4 | ||
| Ejector Stroke | mm | UP100 | ||
| ELECTRICAL EQUIPMENT & GENERAL | ||||
| Power Source | v/hz | 380/60 | ||
| Drive Motor | kw | 11 | ||
| Heater | kw | 19.2 | ||
| Temperature Control Zone | zone | 3+2 | ||
| Hydraulic System Pressure | kgf/cm² | 140 | ||
| Machine Dimension | m | 2.0*2.2*3.3 | ||
| Machine Weight | ton | 2.3 | ||
| Model |
KL460-400-75DV2S-1-S68 Shuttle Table |
KL560-400-100DV2S-1-S68 Shuttle Table |
KL660-400-150DV2S-1-S68 Shuttle Table |
KL860-400-200DVS-1-S68 Shuttle Table |
|
|---|---|---|---|---|---|
| INJECTION UNIT | |||||
| Plunger Diameter | mm | 36 x2 | 36 x2 | 36 x2 | 36 x2 |
| Injection Pressure | kgf/cm² | 437 | 437 | 437 | 437 |
| Injection Capacity | cm³ | 407 | 407 | 407 | 407 |
| Injection Weight﹝LSR=1.08﹞ | oz | 15.5 | 15.5 | 15.5 | 15.5 |
| gram | 439 | 439 | 439 | 439 | |
| Injection Rate | cc/s. | 100 | 100 | 100 | 100 |
| Injection Rate | mm/s | 99 | 99 | 99 | 99 |
| Plunger Stroke | Mm | 200 | 200 | 200 | 200 |
| Nozzle Stroke | Mm | 300 | 300 | 300 | 300 |
| Nozzle Contact Force | Tf | 3.2 | 3.2 | 3.2 | 3.2 |
| CLAMPING UNIT | |||||
| Clamping Force | Tf | 75 | 100 | 100 | 200 |
| Opening Stroke | Mm | 200 | 250 | 250 | 300 |
| Mould Space | Mm | 400(with Heating Platen300) | 450(with Heating Platen350) | 450(with Heating Platen350) | 850(with Heating Platen750) |
| Overall Size of Platens | mm | 620*460 | 770*570 | 920*720 | 1180*1060 |
| Space Between Columns | mm | 460*300 | 560*360 | 660*460 | 860*760 |
| Size Of Shuttler Platen | mm | 450*960 | 550*1150 | 650*1450 | 850*1000 |
| Shuttle Plate Stroke | mm | 500 | 580 | 720 | 1000 |
| Ejector Force | ton | 4 | 4 | 4 | 4 |
| Ejector Stroke | mm | 凸出80 | 凸出100(同步) | 凸出100(同步) | 凸出100(同步) |
| ELECTRICAL EQUIPMENT & GENERAL | |||||
| Power Source / Voltage | V/HZ | 380/60 | 380/60 | 380/60 | 380/60 |
| Drive Motor | KW | 7.5 | 11 | 11 | 15 |
| Heater | kw | 16.4 | 19.2 | 19.2 | 25 |
| Temperature Control Zone | ZONE | 3 | 3 | 3 | 2 |
| Pressure in Hydraulic System | kgf/cm² | 140 | 140 | 140 | 140 |
| Dimension of Machine﹝L*W*H﹞ | m | 1.9*1.2*3.3 | 2.9*1.6*4.2 | 3.2*1.8*4.6 | 3.8*2.2*5.0 |
| Weight of Machine | T | 2.5 | 5.5 | 7 | 10 |
