5 Gallon PET Preform Injection Molding Machine
Features
- Select from 2, 4 or 8 cavities mold specifications.
- Single mold, 4 cavities design. The 2 stage material feed system raises the repeatability rate, lowers the cycle time, and boosts performance.
- When combined with a secondary cooling system, performance can be doubled.
- Temperature control via TSR raises temperature accuracy and, working with the accumulator, increases injection speed.
- Unique economical design is twice as energy efficient as comparable commercial units.
- We offer a complete set of 5 gallon PET bottle manufacturing equipment: raw material dehumidification and drying system; fixed-volume color additive; quickly stabilizing PET bottle preform molding machine; 4 cavity, hot runner mold; rapid cooling robot; and bottle blowing machine. From raw material to finished product stages, this all-inclusive system promotes high productivity, low cost, and superior quality-the bottle blowing defect rate is kept to a minuscule 0.5%.
- When water is shortage and lack of quality sanitary sewer, therefore, water container or bottle is convenience to filling in clean water and to carry with to the public. Moreover, bottle is not only for water-use but also oil-use even other liquid-use.
- King's gallon-size pre-form is one of the best choices in worldwide. Not only does save 20% of shipping cost but also decrease defect of blowing rate down to less 0.5%. And the most critical point is that any color is so clear by King's latest technology and 20 years PET knowledge.

Suitable for Wall
Thickness More

Operator-friendly

Safety Design
For Operator

Energy Saving

Vertical Injection
Horizontal Clamping
Main specifications
MODEL | K410-170-35H-2 | |||
---|---|---|---|---|
INJECTION UNIT | ||||
Shotting Pot Diameter | mm | 44 | 30 | |
Injection Pressure | kgf/cm² | 940 | 2022 | |
Injection Capacity | cm³ | 228 | 106 | |
Injection Weight (PS) | oz | 8.5 | 4.5 | |
gram | 242(ABS) | 127(PC) | ||
Injection Rate | cc/s. | 60 | 60 | |
Screw Speed | r.p.m. | 0~180 | ||
Screw Stroke | mm | 150 | ||
Nozzle Stroke | mm | 150 | ||
Nozzle Contact Force | ton | 4.3 | ||
CLAMPING UNIT | ||||
Clamping Force | ton | 35 | ||
Opening Stroke | mm | 220 | ||
Minimum Mold Height | mm | 90 | ||
Maximum Daylight | mm | 310 | ||
Overall Size Of Platens | mm | 600*340 | ||
Space Between Columns | mm | 410 | ||
Ejector Force | ton | 2.7 | ||
Ejector Stroke | mm | 300 | ||
ELECTRICAL EQUIPMENT & GENERAL | ||||
Power Source / Voltage | v/hz | 380/60 | ||
Drive Motor | kW | 5.6 | ||
Heater | kW | 8.24 | ||
Temperature Control Zone | zone | 5 | ||
Hydraulic System Pressure | kgf/cm² | 140 | ||
Machine Dimension | m | 4.1*0.8*1.7 | ||
Machine Weight | ton | 2.5 | ||