产品特色
- 模具可选二穴、四穴、八穴三种规格。
- 与日本技术合作开发一模四穴模具，两段料管系统设计提高动作重复率，减少Cycle Time增加效能。
- 再搭配二次冷却机械手，产能将提高至2倍。
- 温控系采TSR无接点控制，温度更精确，另搭配蓄压器来提高射出速度。
- 特殊省电设计较市面上标准机节省一倍之电力。
- 本厂提供5加仑PET瓶完整生产原料的除湿干燥，色浆机的定量添加，射出机快速稳定的产出瓶胚，热浇道四穴模具，快速冷却的机械手机构，及后段的吹瓶机，从原料到产品生产成本低，产能高，吹瓶超低不良率仅0.5%。
肉厚产品射料量大产品
操作方便
安全性高
省电省能源
立式关模卧式射出
主要规格
| MODEL | K410-170-35H-2 | |||
|---|---|---|---|---|
| INJECTION UNIT | ||||
| Shotting Pot Diameter | mm | 44 | 30 | |
| Injection Pressure | kgf/cm² | 940 | 2022 | |
| Injection Capacity | cm³ | 228 | 106 | |
| Injection Weight (PS) | oz | 8.5 | 4.5 | |
| gram | 242(ABS) | 127(PC) | ||
| Injection Rate | cc/s. | 60 | 60 | |
| Screw Speed | rpm | 0~180 | ||
| Screw Stroke | mm | 150 | ||
| Nozzle Stroke | mm | 150 | ||
| Nozzle Contact Force | ton | 4.3 | ||
| CLAMPING UNIT | ||||
| Clamping Force | ton | 35 | ||
| Opening Stroke | mm | 220 | ||
| Minimum Mold Height | mm | 90 | ||
| Maximum Daylight | mm | 310 | ||
| Overall Size Of Platens | mm | 600*340 | ||
| Space Between Columns | mm | 410 | ||
| Ejector Force | ton | 2.7 | ||
| Ejector Stroke | mm | 300 | ||
| ELECTRICAL EQUIPMENT & GENERAL | ||||
| Power Source / Voltage | v/hz | 380/60 | ||
| Drive Motor | kW | 5.6 | ||
| Heater | kW | 8.24 | ||
| Temperature Control Zone | zone | 5 | ||
| Hydraulic System Pressure | kgf/cm² | 140 | ||
| Machine Dimension | m | 4.1*0.8*1.7 | ||
| Machine Weight | ton | 2.5 | ||
